The Stampe SV 4B is a Belgian biplane was designed by Jean Stampe and Maurice Vertongen. The first flight of Stampe SV 4B was carried out on 17 May 1933.

Like the original, the model was constructed in complete timber.
Through the good and solid construction, all aerobatic maneuvers may be possible with the original Stampe also be flown with our model. As the good-natured flying characteristics of the original could be transferred to the model, less experienced pilots come without problems cope with this large biplane.

The construction works thanks to the produced in the complete plug system model without any problems. For example, the plug-in wing trailing edge, all fuselage formers, wing struts, wing Center section strut, etc. made ​​ready. And as in all wood parts, a number is milled and pre-finished parts are packaged in modules, eliminates the Search and measure the individual parts. Likewise, all the necessary holes and cutouts for holding the wings, wing struts, wing Center section strut, tail, landing gear, engine, rudder hinges, etc, already produced a perfect fit. Thus can be explained by the high degree of prefabrication of the kit, the model in a relatively short time to finish.

The transport of the model is possible in all a station wagon. Because it can be, depending on the size of the car, only the horizontal stabilizers, or the complete vertical stabilizer disassemble. If that's not enough, even the complete landing gear can be dismantled.

The very good quality kit contains the following parts:

All wooden parts milled clean and ready to install packaged in assemblies, fiberglass cowl and oil tank, full and stable rubber wheels with fiberglass rim, landing gear, ready to install tailwheel, tank with accessories, fueling nozzle, fuel line for the engine, carbon fiber push rods for the original ailerons, pre-cut and drilled cockpit windows, milled cockpit instruments, socket wrench, hexagon screwdriver with rotatable head the model at the airfield build, all bolts, collars, eye bolts, linkage components for all control surfaces, aluminum wing joiner, turnbuckles, Wire ropes, etc; Detailed building instructions on CD and in printed and bound version with over 300 color photographs, available in German, English or Spanish and a lot of small parts.

To complete the model is only glue and a 20m roll EXPERTEX - covering fabric required!

Specifications

Scale         :  1:2,7

Wingspan  :  3,100 mm

Length       :  2,4500 mm

Weight       :  19,000 g (min.)

Power        :  Zenoah G 62 (geared 2,5:1)

The exclusive kit is made to order and after payment!